| Customization: | Available |
|---|---|
| After-sales Service: | One Year Warranty |
| Warranty: | One Year Warranty |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Heli Diesel Forklift 3 Ton CPCD30 Forklift With 3 Meter Lifting Height
This new series forklift trucks that made with the latest technical design provide you excellent operating performance. HELI forklift trucks high standard performance, comfortable driving experience and the simple and safe operation will make your work handier.
Environmental Friendly
- The emission meets EC and EPA new regulation.
- High efficiency hydraulic system to lower the fuel consumption.
- Using environmental friendly material.
- Damping device on the mast to reduce impact and vibration.
- Sound insulating and absorbing device are used to reduce the noise.
Ergonomics design
- Using power braking system to reduce footplate strength.
- Control lever right located to effectively reduce drivers arm tiredness.
- Dual combined switch lever as a car to enable easy operating.
- Wide mast with good visibility.
- Wide space for boarding and driving , increasing leg space.
- Engine automatic monitor control, when the engine oil pressure is too low or water temperature is too high, the engine will be automatically shut off.
Safety performance
- Enclose cabin is made of assembling steel plate, high strength overhead is designed to ensure the safety.
- Parking brake with safety protection device, when parking brake is working, the forklift will not move even the direction lever is turned.
- Safety device in mast hydraulic system prevents material falling down in case of hose broken.
- High pressure hose is designed far away from the driver.
- Safety wire harness, using waterproof plug
| Dimensions | ||
| Overall length | Mm | 12500 |
| Overall width | Mm | 2500 |
| Overall height | Mm | 3385 |
| Weight | ||
| Dead weight in travel state | Kg | 32000 |
| Front axle load | Kg | 6800 |
| Rear axle load | Kg | 24800 |
| Power | ||
| Engine model | SC9DF300Q3 WD615.329 | |
| Engine rated output | Kw(r/min) | 221/2200 213/2200 |
| Engine rated torque | N.m(r/min) | 1250 1160 |
| Travel | ||
| Max Travel speed | Km/h | 80 |
| Min. turning diameter | M | ≤22 |
| Min. ground clearance | Mm | 275 |
| Approach angle | . | 18 |
| Departure angle | . | 13 |
| Max. gradeability | % | 40 |
| Fuel consumption of per 100km | L | 37 |
| Lifting performance | ||
| Max. total rated lifting load | T | 25 |
| Min. rated working radius | M | 3 |
| Turning radius at swing table tail | Mm | 3260 |
| Base boom max. load moment | Kn.m | 961 |
| Base boom | M | 10.4 |
| Full-extend boom | M | 40 |
| Full-extend boom+Jib | m | 48.3 |
| Outrigger longitudinal distance span | M | 5.36 |
| Outrigger lateral distance span | M | 6.0 |
| Working speed | ||
| Boom elevating time | S | 68 |
| Boom telescoping time | S | 150 |
| Max. slewing speed | r/min | 2.5 |
| Main winch max. speed(single line) | m/min | 120 |
| Auxiliary winch max.speed(single line) | m/min | 120 |
){kind=link}