Customization: | Available |
---|---|
Certification: | ISO |
Condition: | New |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
NO. | DESCRIPTION | UNIT | DIMENSIONS |
A | Overall Height - Bucket Raised | mm | 5283 |
B | Bucket Pin Height at Max. Lift | mm | 4136 |
C | Dump Clearance at Max. Lift ( 45°) | mm | 3078 |
D | Reach at Max. Lift and 45° Dump | mm | 1190 |
E | Rack Back Angle at Carry | ° | 48.3 |
F | Rack Back Angle at Ground | ° | 45 |
G | Digging Depth | mm | 45 |
H | Rack Back Angle at Max. Lift | ° | 52.6 |
I | Dump Angle at Max. Lift | ° | 45 |
J | Carry Height | mm | 400 |
K | Ground Clearance | mm | 556 |
L | Center Line of Front Axle to Hitch | mm | 1120 |
M | Wheel Base | mm | 2930 |
N | Overall Length | mm | 7760 |
O | Departure Angle | ° | 28.6 |
P | Height to Top of Cab | mm | 3380 |
Q | Overall Width over Bucket | mm | 3000 |
R | Min. Turning Radius over Bucket | mm | 6805 |
S | Min. Turning Radius over Tires | mm | 6182(Front Tire) |
5957(Rear Tire) | |||
T | Steering Angle - Left/Right | ° | 35 |
U | Width at Tread Center | mm | 2240 |
V | Overall Width over Tires | mm | 2835 |
OVERALL DATA | |
Bucket Capacity | 2.7m³ |
Rated Payload | 5000kg |
Operating Weight | 15800±300kg |
Traction Force | 155±3kN |
Breakout Force | 155±3kN |
L×W×H | 7760×3000×3380mm |
ENGINE&ELECTRICAL SYSTEM | |
Maker/Model | WEICHAI/WD10G220E21 |
Emission Standard | EPA (Tier II) |
Engine Type | 4 Stroke,Turbocharged,Water-cooled,Direct Injection,Diesel Engine |
Rated Power | 162kW(220hp)/2200rpm |
Maximum Torque | 860N·m/1400-1600rpm |
Bore x Stroke (mm) | 126×130 |
No. of Cylinders/Displacement | 6/9.726L |
Compression Ratio | 17 |
Air Cleaner | Three Stage Air Cleaner with Cyclone Pre-cleaner |
Alternator | 55Amp |
Battery | 2-24V/120Ah |
Starting Motor | 24V/7.5kW |
Heating Capacity (W) | 5000W |
Cooling Capacity (W) | 4700W |
DRIVE TRAIN | |||||
Transmission Type | Planetary Powershift Transmission | ||||
Shift Type | Mechanical Powershift Control | ||||
Pressure of Transmission | 1.2-1.5MPa | ||||
Torque Converter Type | Single-stage,Duo-turbine,4-element | ||||
Torque Ratio | 4 | ||||
Axles | Rigid Front Axle&Oscillating Rear Axle | ||||
Rear Axle Oscillation (°) | ±10° | ||||
Differential | Conventional | ||||
Main Reducer | Spiral Bevel,1-stage Reduction | ||||
Final Reducer | Planetary Reduction | ||||
Tire | 23.5-25 L-3 16PR TT | ||||
Travel Speeds | km/h | 1st | 2nd | 3rd | 4th |
Forward | 11.5 | 36 | |||
Reverse | 16 |
BRAKE SYSTEM | |
Service Brake | Single Circuit Caliper,Dry Brake |
Setting Pressure | 0.70-0.78MPa |
Parking Brake | Flexible Shaft Controlled Caliper Brake |
Emergency Brake | Flexible Shaft Controlled Caliper Brake |
STEERING SYSTEM | ||
Type | Hydraulic Load Sensing System | |
Pump | Gear Pump,152L/min·2200rpm | |
System Pressure | 15MPa | |
Cylinder | Type | Double Acting |
Bore x Stroke | 2-90×324mm | |
Steering Angle | ±35° |
HYDRAULIC SYSTEM | ||||||
Type | Single-lever(Joystick) Control | |||||
Pump | Gear Pump,190L/min·2200rpm | |||||
Control Valve | 2 Spool (Bucket&Boom) | |||||
System Pressure | 16MPa | |||||
Cylinder | Lift Cylinder | 2-160×836mm | ||||
No.-Bore x stroke | Tilt Cylinder | 1-180×559mm | ||||
Joystick Control Pressure | 2.5MPa | |||||
Cycle Time | Raise | Dump | Lower | Total | ||
(Sec) | 6 | 1.2 | 4.3 | 11.5 |
SERVICE REFILL CAPACITY | |
Fuel Tank (L) | 280L |
Hydraulic Tank (L) | 245/250(3rd Spool for Auxiliary Function)L |
Crankshaft (L) | 20L |
Transmission (L) | 46L |
Front Axle/Rear Axle (L) | 28L/28L |