Customization: | Available |
---|---|
Type: | Universal Type |
Transmission: | Hydraulic Transmission |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Engine | |||||||
Model | KTA19-C525 or QSX15 | ||||||
Type | Inline, 6-cylinder, turbocharged, water-cooled | ||||||
Flywheel power, kW | 316 | ||||||
Rated speed, r/min | 1800 | ||||||
Transmission system | |||||||
Torque converter | 3-element, single-stage, single-phase | ||||||
Transmission | Hydraulic shift, planetary gear, hydraulic-actuated, multiple-disc clutch, forced lubrication, 3 forward and 3 reverse speeds | ||||||
Bevel gear | Helical bevel gear, one reduction, splash lubricated | ||||||
Steering clutch | Wet, multiple-disc, spring loaded, hydraulically operated and released | ||||||
Steering brake | Wet, band brake, operated with hydraulic booster and valve inner linkage | ||||||
Final drive | Spur gear, double reduction, splash lubricated | ||||||
Travel speed, km/h | |||||||
Forward: | |||||||
1st | 3.9 | ||||||
2nd | 6.7 | ||||||
3rd | 12.2 | ||||||
Reverse: | |||||||
1st | 4.8 | ||||||
2nd | 8.5 | ||||||
3rd | 15.1 | ||||||
Under carriage | |||||||
Sprocket | Segmented | ||||||
Track tension | Hydraulic-adjusted | ||||||
Number of track shoes, each side | 7 | ||||||
Number of carrier rollers, each side | 1 | ||||||
* Floating seals are used in all track rollers, carrier rollers, sprocket and front idlers | |||||||
Track | |||||||
Type | Sealed and lubricated track | ||||||
Track pitch, mm | 240 | ||||||
Track width, mm | 610 | ||||||
Ground clearance, mm | 517 | ||||||
Track gauge, mm | 2250 | ||||||
Ground pressure, MPa | 0.102 | ||||||
Gradeability, ° | latitude 30° / transverse 25° | ||||||
Hydraulic system of work equipment | |||||||
Working pressure, MPa | 18.3 | ||||||
Rated flow (at 1800 r/min), L/min | 300 | ||||||
Pump | Double vane pump | ||||||
Valve position | Raise, hold, lower, float | ||||||
Work equipment | |||||||
Blade type | S-type blade | ||||||
Dimensions, Length x Width x Height, mm | 8478 x 4314 x 3970 (with ripper) | ||||||
Weight, kg | 48888 (with ripper) | ||||||
Blade dimensions, Width x Height, mm | 4314 x 1765 | ||||||
Max. drop below ground, mm | 614 | ||||||
Dozing capacity, m³ | 13.5 | ||||||
Ripper | |||||||
Type | 1-shank | ||||||
Ripper' s weight, kg | 4300 | ||||||
Rippering angle, ° | 45 |