Cat Caterpillar 215HP Crawler Bulldozer (D6T)

• Type: Universal Type
• Transmission: Hydraulic Transmission
• Walking Mode: Crawler
• Load and Unload Method: Front Discharge
• Engine Power: 147~515kw
• Certification: ISO9001: 2000
• Model NO.: D6T
• Condition: New
• Color: Yellow
• Transport Package: Standard Seaworthy Packing
• Specification: 215hp
• Trademark: CAT
• Origin: China
• Production Capacity: 1000 Units/Month

Product Description

CAT Caterpillar 215hp crawler bulldozer (D6T)

Contact:
Annie Li / Sales Manager
 
mobile No.:[phone]
EVANGEL INDUSTRIAL (SHANGHAI) CO., LTD
EVANGEL INTERNATIONAL MACHINERY LTD
ADD: Suite 1326, Fortune Times Tower, No. 1438 North Shanxi Road, Shanghai, China
Tel: [phone]           Fax:[phone]
 

OVERVIEW

The new D6T dozer makes high efficiency dozing as easy as driving your pickup truck. A smooth-shifting, fully automatic four-speed Cat® transmission continuously optimizes the power train for the application. You save fuel and operator effort, without sacrificing durability, power or productivity. Work smarter too, with a full range of Cat Connect GRADE technology features to fit your job site needs.

ENGINE
 

Engine Model	Cat C9.3 ACERT™
Flywheel Power	215.0 HP
Displacement	567.0 in³
Emissions	U.S. EPA Tier 4 Final
Net Power - 2,200 rpm - ISO 9249/SAE J1349	215.0 HP
Net Power - Maximum - ISO 9249/SAE J1349 at 1,200 rpm	245.0 HP
Note (1)	All non road Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations.
Note (2)	Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Build Number	19

SERVICE REFILL CAPACITIES

Fuel Tank	97.2 gal (US)
Cooling System	12.2 gal (US)
Engine Crankcase	6.5 gal (US)
Power Train	39.1 gal (US)
Final Drive - Each	3.6 gal (US)
Roller Frames - Each	6.6 gal (US)
Pivot Shaft Compartment	1.3 gal (US)
Hydraulic Tank	16.5 gal (US)
DEF Tank	4.5 gal (US)

WEIGHTS

Operating Weight

47138.0 lb

OPERATING WEIGHTS

LGP A	53829.0 lb
LGP S	51385.0 lb
XL A	47846.0 lb
XL SU	47138.0 lb
XL VPAT	53042.0 lb
XW A	49797.0 lb
XW SU	48909.0 lb
XW VPAT	54045.0 lb
LGP VPAT	54526.0 lb
Note	Operating weight includes blade, lubricants, coolant, full fuel tank, standard track, ROPS/FOPS cab, drawbar and operator.

BLADES - CAPACITY

LGP A-Blade	6.46 yd³
LGP S-Blade	4.96 yd³
XL A - Blade	5.17 yd³
XL SU - Blade	7.26 yd³
XL VPAT - Blade	6.07 yd³
XW A - Blade	5.69 yd³
XW SU - Blade	7.38 yd³
XW VPAT - Blade	6.57 yd³
LGP VPAT - Blade	6.57 yd³

BLADES - WIDTH

LGP A-Blade	16.6 ft
LGP S-Blade	13.3 ft
LGP VPAT - Blade	13.7 ft
XL A - Blade	13.7 ft
XL SU - Blade	10.7 ft
XL VPAT - Blade	12.7 ft
XW A - Blade	14.8 ft
XW SU - Blade	11.7 ft
XW VPAT - Blade	13.7 ft

DIMENSIONS - LGP

Ground Clearance	16.0 in
Ground Pressure (ISO 16754)(3)	5.11 psi
Length - Basic Tractor(2)	14.5 ft
Length - Track on Ground	10.67 ft
Machine Height - To Product Link Antenna(1)	10.83 ft
Note (1)	(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note (2)	(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note (3)	(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Width - Tractor - Without Trunnions - Standard Track	10.5 ft

DIMENSIONS - LGP VPAT

Ground Clearance	16.0 in
Ground Pressure (ISO 16754)(3)	6.28 psi
Length - Basic Tractor(2)	16.42 ft
Length - Track on Ground	10.67 ft
Machine Height - To Product Link Antenna(1)	10.83 ft
Note (1)	(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note (2)	(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note (3)	(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Width - Tractor - Without Trunnions - Standard Track	10.33 ft

DIMENSIONS - XL

Ground Clearance	15.0 in
Ground Pressure (ISO 16754)(3)	8.66 psi
Length - Basic Tractor(2)	13.83 ft
Length - Track on Ground	9.25 ft
Machine Height - To Product Link Antenna(1)	10.67 ft
Note (1)	(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note (2)	(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note (3)	(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Width - Tractor - Without Trunnions - Standard Track	8.0 ft

DIMENSIONS - XL VPAT

Ground Clearance	15.0 in
Ground Pressure (ISO 16754)(3)	9.78 psi
Length - Basic Tractor(2)	16.08 ft
Length - Track on Ground	9.25 ft
Machine Height - To Product Link Antenna(1)	10.67 ft
Note (1)	(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note (2)	(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note (3)	(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Width - Tractor - Without Trunnions - Standard Track	8.92 ft

DIMENSIONS - XW

Ground Clearance	15.0 in
Ground Pressure (ISO 16754)(3)	6.64 psi
Length - Basic Tractor(2)	13.83 ft
Length - Track on Ground	9.25 ft
Machine Height - To Product Link Antenna(1)	10.67 ft
Note (1)	(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note (2)	(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note (3)	(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Width - Tractor - Without Trunnions - Standard Track	9.17 ft

DIMENSIONS - XW VPAT

Ground Clearance	16.0 in
Ground Pressure (ISO 16754)(3)	6.92 psi
Length - Basic Tractor(2)	16.42 ft
Length - Track on Ground	10.67 ft
Machine Height - To Product Link Antenna(1)	10.83 ft
Note (1)	(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note (2)	(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note (3)	(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Width - Tractor - Without Trunnions - Standard Track	9.83 ft