| Overall Dimension |
| 1 |
Length(with bucket on ground) |
7085(mm) |
| 2 |
Width |
2313(mm) |
| 3 |
Load Bucket width |
2313(mm) |
| 4 |
Height(To the top of the cab) |
2710 (mm) |
| 5 |
Height(To the top of the digging pole) |
3424 (mm) |
| 6 |
Wheelbase |
2155.5(mm) |
| 7 |
Back wheel Tread |
1700(mm) |
| 8 |
Fore wheel Tread |
1880(mm) |
| 9 |
Min. ground clearance |
355(mm) for 2WD 275(mm) for 4WD |
| Main Loading Technical Specification |
| 1 |
Rated load |
1700(Kg) |
| 2 |
Operating weight |
7600KG |
| 3 |
Max lifting capability |
>2500KG |
| 4 |
Rated load bucket capacity |
1.0(m3) |
| 5 |
Max. load breakout force |
>60kN |
| 6 |
Max. dump clearance |
2714(mm) |
| 7 |
Max. Dump reach |
845(mm) |
| 8 |
Dump angle at any position |
≥43.5° |
| 9 |
Min. turning radius |
| |
(1) Outside of bucket |
5280(mm) for 2WD 5670(mm) for 4WD |
| (2) Center of front wheel |
3795 (mm) for 2WD 4380(mm) for 4WD |
| 10 |
Lifting time of loading bucket |
≤4.5(sec.) |
| 11 |
Lowering time of loading bucket |
≤7.5(sec.) |
| 12 |
Dumping time |
≤1.5(sec.) |
| 13 |
Traveling speed(Km/h),4 forward and 4 reverse |
| |
(1) I gear forward |
6 |
| (2) II gear forward |
9.6 |
| (3) III gear forward |
20.5 |
| (4) IV gear forward |
38 |
| (1) I gear reverse |
6.0 |
| |
(2) II gear reverse |
9.6 |
| (3) III gear reverse |
20.5 |
| (4) IV gear reverse |
38 |
| Main Digging Technical Specification |
| 1 |
Rated digging bucket capacity |
0.3(m3) |
| 2 |
Max. digging depth |
4405(mm) |
| 3 |
Max. digging force |
>50±10%kN |
| 4 |
Max. digging radius |
5481(mm) |
| 5 |
Max. dumping height |
3737(mm) |
| Diesel engine |
| 1 |
Model |
WD DEUTZ WP4G95E221 |
| 2 |
Type |
Direct injection. Turbocharged. Water cooling |
| 3 |
Rated output |
70 (kW) |
| 4 |
Total exhaust of cylinder |
4.5(L) |
| 5 |
Inter-bore of cylinder/stroke |
102/130(mm) |
| 6 |
Voltage of starting motor |
12(V) |
| 7 |
Rated speed |
2200(r/min) |
| 8 |
Max. Torque |
380(N.M) |
| 9 |
Starting type |
Electric |
| 10 |
Min. specific fuel consumption |
216(g/Kw.h) |
| Transmission System |
| 1. Torque Converter |
| 1 |
Model |
CARRARO |
| 2 |
Cooling type |
Pressure oil circulating |
| 2. Transmission case |
| 1 |
Model |
CARRARO |
| 2 |
Type |
Synchromesh mechanical shift |
| 3 |
Gear shift posit |
4 Forward and 4 reverse gears |
| 3. Axle and Tire |
| 1 |
Model |
CARRARO |
| 2 |
Type of main reducer |
spiral bevel gear, single stage |
| 3 |
Type of final reducer |
Single stage planetary |
| 4 |
Max. steering angle |
55° |
| 5 |
Tire type |
4WD fore tire12-16.5NHS-10PR |
| 2WD fore tire11L-16F3-12PR |
| Rear tire 19.5L-24R4-12PR |
| Working Device Hydraulic System |
| 1 |
Model of oil pump |
JHP2063C |
| 2 |
System pressure |
210(kgf/cm2) |
| 3 |
Model of load valve |
ZL20.3S4C-00 |
| 4 |
Model of excavate valve |
WJ20.7SC3-00 |
| Steering System |
| 1 |
Type |
Fore wheel Steering |
| 2 |
Model of steering pump |
JHP2063C |
| 3 |
Model of Redirector |
BZZ5-E160B+ FKB-3022 |
| 4 |
System pressure |
140(kgf/cm2) |
| Oil Capacity |
| 1 |
Fuel(diesel) |
151(L) |
| 2 |
Engine lubricating oil |
11(L) |
| 3 |
Oil for converter and gear box |
For 2WD |
18.5(L) |
| For 4WD |
21(L) |
| 4 |
Oil for hydraulic system |
110(L) |
| 5 |
Oil for driving axles(F/R) |
7.6+17(L) |
Audited Supplier 
){kind=link}
){kind=link}