4 Ton Mini Manual Road Roller Compactor Xmr403 in Stock

• Customization: Available
• Warranty: 1 Year
• Type: Road Roller
• Model NO.: XMR403
• Working Method: Vibration
• Axle: Biaxial Dual-Drum
• Grinding Wheel Type: Tire Grind
• Compaction Depth: 35cm
• Engine Type: Diesel Engine
• Travel Speed: 40cm/s
• Centrifugal Force: 40KN
• Certification: CE
• Condition: New
• Operating Weight(Kg): 4000kg
• Engine Model: Sc4h115.4G2b
• Rated Power(Kw/Rpm): 86
• Transport Package: Nude Package
• Specification: 6150*2300*3200MM
• Trademark: Evangel
• Origin: China
• Production Capacity: 100 Sets/Month

Product Description

XMR403 is a light vibratory roller with operating weight of 4 tons. This machine is suitable for surface and edge compaction construction for asphalt engineering, cement engineering and So on, also suitable for sub-base and base, sand and gravel material compaction work, is the idealist compaction machinery for all sorts of parking lot construction, road, sidewalks and bikeway compaction, as well as a variety of road maintenance engineering.

Performance Characteristics:

* Closed hydraulic drive system is adopted to realize stepless speed change.
* Brake system uses the neutral position braking, emergency braking and parking brake, short braking distance and high braking torque, ensuring the safety of the product.
* The front vision of machine is less than 1x0.75 m, rear view without any shade, which provides drivers with a good sight range.
* The vibration system can realize the simultaneous vibration and independent vibration of the rear and front drum, and meets the different working conditions.
* High frequency vibration and excitation force design, high working efficiency, good compaction effect.
Vibration drum width is larger than frame width, convenient to observe compaction condition of drum edge in the construction.
* Large ground clearance and curb clearance, strong trafficabilit, good edge com- paction performance.
* This machine has also the air intake preheating function, can realize low temperature cold start.
* Changchai water-cooled turbocharged engine, in compliance with China Stage III emission requirements, allowing machine working normally in the environment at an altitude of 2000 meters and temperature above -20 ºC.

Item	Unit	XMR403
Operating mass	kg	4000
Static linear load (front drum/rear drum)	N/cm	157/157
Vibrational frequency	Hz	60
Amplitude	mm	0.41
Exciting force	kN	42
Vibrating drum (Diameter x width)	mm	800x1300
Theoretical gradeability	%	30
Operating speed	km/h	0~10.6
Wheel base	mm	1920
Steering angle	°	±30
Swing angle	°	±10
Minimum turning radius	mm	3062 / 4362
Minimum ground clearance	mm	348
Engine type		ZN490B
Rated power	kW	36
Rated speed	r/min	2600