Customization: | Available |
---|---|
After-sales Service: | Provide |
Warranty: | Provide |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Name:Ruben
CHN/ENG/ESP
Contact me via WhatsApp so we can communicate more conveniently
Looking forward to your message.
Advantage
♣ The luxury cab and control room have modern streamlined style.
♣ High power, low fuel consumption and noise meet the requirements of national standards.
♣ The platform board is fully covered, which is convenient for working and repairing on the vehicle.
♣ The outrigger system is operated on both sides, which is convenient and practical.
♣ Truck crane is a kind of crane mounted on the chassis of ordinary or special automobile. Its driving cab is separated from the crane control cab.
♣ The advantages of this crane are good maneuverability and fast transfer. The chassis performance of the truck crane is the same as that of the truck with the same total load, which meets the technical requirements of road vehicles and can be used on all kinds of highways without obstruction.
Item | Unit | Value | Remarks | |
Working performance | Max. rated lifting capacity | kg | 55000 | |
Max. load moment of basic boom | kN.m | 2009 | ||
Max. load moment of main boom(fully extended) | kN.m | 1050 | ||
Max. load moment of basic boom | m | 12.6 | ||
Max. lifting height of main boom | m | 43.6 | These parameters do not include deflection of main boom and jib | |
Max. lifting height of jib | m | 58 | ||
Working speeds | Max. hoist rope speed(Main winch) | m/min | 120 | |
Max. hoist rope speed(Auxiliary winch) | m/min | 120 | ||
Boom demrricking up time | s | 50 | ||
Boom demrricking up time | s | 95 | ||
Slewing speed | r/min | 0-2.2 | ||
Driving parameters | Max. height above sea level | m | 2000 | |
Max. driving speed | km/h | 76 | ||
Max. gradeability | % | 40 | ||
Min. turning diameter | m | ≤24 | ||
Min. ground clearance | mm | 260 | ||
Oil consumption per hundred kilometers | L | 43 | ||
Mass | Deadweight in driving condition | kg | 42000 | |
Complete vehicle kerb mass | kg | 41870 | ||
Front axle load | kg | 16000 | ||
Rear axle load | kg | 26000 | ||
Dimensions | Overall dimensions(L×W×H) | mm | 13700×2800×3800 | |
Outrigger spread(L) | m | 5.92 | ||
Outrigger spread(W) | m | Fully extended:7.1,intermediately extended:4.8 | ||
Tail slewing radius | mm | 3900 | ||
Main boom length | m | 11.4 - 43.0 | ||
Boom angle | ° | -2 - 80 | ||
jib length | m | 9.2,14.6 | Low-mounted, open-type | |
Offset | ° | 5,25,45 |