| Customization: | Available |
|---|---|
| Type: | Universal Type |
| Transmission: | Hydraulic - Mechanical Transmission |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Engine:
Make: Cum-mins
Model: NTA855-C360S10
Rated Power: 235 kW @ 2000 rpm
Maximum Torque: 1440 Nm @ 1400 rpm
Displacement: 14.010 L
Cylinder: 6 - 139.7 x 152.4 mm (bore x stroke)
Water cooled: Yes
Direct injection: Yes
Radiator: Enlarged tropical radiator
Power transmission:
Make: SHANTUI
Torque converter: YJ409, 3-element, single-stage, single phase, ratio 2.3 - 2.54
Transmission: Planetary gear type, multi-disc clutch, hydraulically connected, forced lubri- cation
Main drive: Spiral bevel gear, splash lubrication, single-stage speed reduction, ratio 2.33
Steering clutch: Wet, multi-disc, spring loaded, hydrauli- cally seperated, hydraulic control
Steering brake: Wet, floating, direct on-off hydraulic inter-linking operation
Final drive: 2-stage speed reduction of spur gear, splash lubrication, ratio 17.19
Number of drive wheel teeth: 25
Undercarriage system:
Make: SHANTUI
Type: Swing type of sprayed beam, suspended structure of equalizer bar
Carrier rollers: 2 each side
Track rollers: 7 each side
Track type: Assembled, single-grouser track
Track shoe width: 560 mm
Grouser height: 80 mm
No. of track shoes: 41 each side
Pitch: 228.6 mm
Ground pressure: 0.084 Mpa
Hydraulic control system:
Rated pressure: 14 MPa
Pump type: Gear Pump
Flow rate: 355 L/min
Blade lift cylinder: Φ140 mm × 2
Blade tilt cylinder: Φ225 mm × 1
Ripper cylinder: Φ225 mm × 4
Cab:
ROPS & FOPS: YES
A/C: YES
Adjustable air suspension seat: YES
Seat belt: YES
Strobe light: YES
Fire extinguisher: YES, SABS Standard
Engine oil pressure meter: YES
Hydraulic oil temperature meter: YES
Coolant temperature meter: YES
Hour meter: YES
Voltage meter: YES
Overall length: 8650 mm
Overall width: 4130 mm
Overall height: 3725 mm
Ripper overall width: 2420 mm
Machine width (Blade off): 2780 mm
Machine length (Blade off): 7360 mm
Min. ground clearance: 500 mm
Min. turning radius: 3.8 m
Gradeability: 30°
Track Gauge: 2140 mm
Operating weight: 38 ton
Batteries: 2 x 12 V-165 Ah
Starter Motor: 7.5 kW
Alternator: 35 A
Fuel tank: 640 L
Engine coolant: 121 L
Engine oil: 47 L
Hydraulic tank: 164 L
Transmission and steering case: 185 L
Final drive case: 110 L each side
| ITEM | SD32W | Engine | Cummins NTA855-C360S10 |
| L×W×H (Ripper not included) | 6880×4130×3640mm | Ripping depth of ripper | Single ripper 1250mm |
| Operating weight (Ripper not included) | 38t | Three-shank ripper 842mm | |
| Rated power | 235/2000kW/rpm | Lifting height of ripper |
Single ripper955mm Three-shank ripper 883mm |
| Gradeability | 30° | Number of carriers (each side) | 2 |
| Blade type | Straight tilt blade | Number of track rollers (each side) | 7 |
| Blade width | 4130x1590 mm | Number of track shoes (each side) | 41 |
| Width of track shoe | 560mm | ||
| Track gauge | 2140mm | ||
| Ground length and ground pressure | 3150-0.105mm/MPa | ||
| Dozing capacity | 10m3 | Pitch | 228.6mm |
| Forward speed | 0-3.6km/h | ||
| 0-6.6km/h | |||
| 0-11.5km/h | |||
| Ma× drop below ground of blade | 560 mm | Reverse speed | 0-4.4km/h |
| Lift height of blade | 1560 mm | 0-7.8km/h | |
| Ripper type |
Single ripper Three-shank ripper |
0-13. |
){kind=link}