Customization: | Available |
---|---|
Type: | Universal Type |
Transmission: | Hydraulic - Mechanical Transmission |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Engine | ||||||||||
Model | Caterpillar CAT C6121ZG05 | |||||||||
Type | Water cooled, single line, vertical, four strokes, turbocharged, 6-cylinders | |||||||||
Flywheel power, kW | 131 | |||||||||
Rated speed, r/min | 1900 | |||||||||
Number of cylinders - bore x stroke, mm | 6-ø121 x 152 | |||||||||
Starting method | 24V electric starting | |||||||||
Battery | 24V | |||||||||
Transmission system | ||||||||||
Torque converter | 3-element, 1-stage, 1-phase | |||||||||
Transmission | Planetary gear, multiple disc, hydraulic actuated, forced lubrication | |||||||||
Bevel gear | Helical gear, one reduction, splash lubricated | |||||||||
Steering clutch | Wet, multiple-disc, hydraulically pressed, spring loaded | |||||||||
Steering brake | Wet, band brake, operated with hydraulic booster and valve inner linkage | |||||||||
Final drive | Spur gear, double reduction, splash lubricated | |||||||||
Travel speed, km/h | ||||||||||
Forward: | ||||||||||
• 1st | 4.0 | |||||||||
• 2nd | 6.9 | |||||||||
• 3rd | 10.8 | |||||||||
Reverse: | ||||||||||
• 1st | 4.8 | |||||||||
• 2nd | 8.4 | |||||||||
• 3rd | 12.4 | |||||||||
Under carriage | ||||||||||
Sprocket | Segmented | |||||||||
Track tension | Hydraulic-adjusted | |||||||||
Number of track shoes, each side | 7 | |||||||||
Number of carrier rollers, each side | 2 | |||||||||
* Floating seals are used in all track rollers, carrier rollers, sprocket and front idlers | ||||||||||
Track | ||||||||||
Type | Sealed, lubricated single grouser | |||||||||
Track pitch, mm | 205 | |||||||||
Track width, mm | 560 | |||||||||
Lenghth of track on ground, mm | 2990 | |||||||||
Ground clearance, mm | 445 | |||||||||
Track gauge, mm | 1880 | |||||||||
Ground pressure, MPa | 0.055 | |||||||||
Gradeability, ° | latitude 30° / transverse 25° | |||||||||
Hydraulic system of work equipment | ||||||||||
Working pressure, MPa | 15.5 | |||||||||
Rated flow (at 2000 r/min), L/min | 178 | |||||||||
Pump | Gear pump | |||||||||
Valve position | Raise, hold, lower, float | |||||||||
Hydraulic systen pressure, MPa | 3.1 | |||||||||
Work equipment | ||||||||||
Blade type | Straight tilt blade | |||||||||
Overall dimensions, Length x Width x Height, mm | 5037 х 3270 х 3077 | |||||||||
Weight (w/o ripper), kg | 16100 | |||||||||
Blade dimensions, Width x Height, mm | 3297 х 1170 | |||||||||
Max. lift above ground, mm | - | |||||||||
Max. drop below ground, mm | 592 | |||||||||
Dozing capacity, m³ | 4.5 | |||||||||
Ripper | ||||||||||
Type | 1-shank | |||||||||
Ripper's weight, kg | 4300 | |||||||||
Volumes of liquids | ||||||||||
Fuel tank, L | 295 | |||||||||
Cooling system capacity, L | 38 | |||||||||
Hydraulic system tank capacity, L | 100 |