| Customization: | Available |
|---|---|
| Type: | Concrete Mixer |
| Shotcrete Type: | Wet |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The HY-220 self loading concrete mixer has a discharge capacity of 2.2M3, using four wheel drive, which can independently complete feeding, weighing, pumping, mixing,
transportation, unloading six major functions. It is suitable for concrete transportation and site construction operation, which can greatly improve the production efficiency, reduce the time and cost.
The mixer consists of chassis, transmission system, hydraulic system, frame, mixing tank, charging and discharging device, water supply system, operating system, human ladder etc..
The front end of the mixing tank is connected and installed with the reducer on the front of the frame, and the back end is supported by two riding wheels installed in the back of the frame.
| Net weight | 7100 KG |
| Gross weight | 12000KG |
| Tilt angle | 0.3 |
| Travel speed | High speed: 0-30KM/H; low speed: 0-9KM/H |
| Minimum turning radius | 6.5M/R |
| Transmission mode | Full hydraulic transmission |
| Drive mode | 4-wheel drive |
| Control mode | Hydraulic control valve |
| Brake mode | Air Brake |
| Chassis | Off-road |
| Tyre model | 20.5-16 |
| Overall dimensions | 6252*2200*2892mm |
1. Mixing Drum
| Loader bucket capacity | 0.6m3 |
| Output capacity | 2.2M3 |
| Bank Angle | 16 ° |
| Rotation Angle | 19-21R/min |
2. Engine
| Type | Yunnei |
| Rated Power/RPM | 76KW/2400RPM |
| Max. Torque/RPM | 460N.M/1400RPM |
| Cylinder | 4 |
| Starter | Electric |
| Cooling type | water cooling |
3. Feed mechanism
| Weighing model | computer control | |
| Concrete Standard | C15.C20.C25 C30 | |
| Accuracy | Cement | ≤±2%/time |
| Relative Error | ≤±3%/time | |
| Water | ≤±1%/time | |
| Additive | ≤±1%/time | |
| Admixture | ≤±2%/time | |
4. Chute
| Swing Angle | ≥60° |
| Angle control | Hydraulic |
| Long Size | 176cm |
| Short Size | 40cm |
){kind=link}