Shantui bulldozer sd32/shantui sd32 bulldozer/bulldozer shantui sd32
1. Shantui SD bulldozers series, products are 130hp, 160hp, 220hp, 230hp, 320hp etc., 12 class, there are standard, wetland, wetland, desert, plateau type, pushing coal deformation, forest logging and sanitation and other products.
2. Various types of bulldozer optional straight tilting shovel, Angle blade, u-shaped shovel, sanitation shovel cab and air conditioning, easy rolling bridge, bridge and three teeth ripper, single tooth ripper, scraper device etc.
3. It is mainly used in airports, roads, mines, DAMS, railways and other job site conditions.
Shantui bulldozer sd32/shantui sd32 bulldozer/bulldozer shantui sd32
Final drive
Final drive--2-stage spur gear, speed reduction, splash lubrication
Undercarriage system
Suspension--swing type of sprayed beam, suspended structure of equalizer bar
NO. Of carrier rollers--2(each side)
NO. Of track rollers--7(each side)
NO. Of idler--1(each side)
Track shoe
Assembled type--single tooth
Pitch--228.6mm
Width--560mm
Tooth height--80mm
NO. Of track shoes--41(each side)
Track gauge--2140mm
Ground pressure--0.105Mpa
Weight
Operating weight--37200kg
With multi-ripper--40975kg
Hydraulic control system
Max. Pressure--14Mpa(140kg/m² )
Type--gear pump
Displacement--335.5L/min
Control valve type--guiding valve, raise, hold, lower, float
Hydraulic tank--control valve and oil filter inner-installed type
Steering system
Steering clutch--wet type, multi-disc, spring loaded, hydraulially separated, hand and hydraulic control operated
Steering brake--wet type, band brake, foot operated(with hydraulic booster, interconnected with clutch)
Coolant and lubricant capacity
Working device and attachment
Straight-tilt dozer--hydraulically actuated with servo valve
Blade supporting method--brace type tilt cylinder on right side
Width--4130mm
Height--1590mm
Max. Lift above ground--1560mm
Max. Drop below ground--560mm
Max. Tilt adjustment--1000mm
3-shank ripper
Max. Digging depth--542mm
Max. Lift above ground--883mm
Standard digging angle--45°
Variable within range between35° -63°
Max. Digging depth of single ripper--1250mm
Max. Lift above ground--965mm
Overall dimensions
LXWXH--6880X4130X3725
3-shank ripper
Max. Digging depth--542mm
Max. Lift above ground--883mm
Standard digging angle--45°
Variable within range between35° -63°
Max. Digging depth of single ripper--1250mm
Max. Lift above ground--965mm
Overall dimensions
LXWXH--6880X4130X3725
| ITEM |
UNIT |
SD23 |
| L×W×H (Ripper not included) |
mm |
5874×3725×3360 |
| Operating weight (Ripper not included) |
t |
24.6 |
| Engine |
- |
Cummins NT855-C280S10 |
| Rated power |
kW/rpm |
169/2000 |
| Gradeability |
° |
30 |
| Blade type |
- |
Straight tilt bladeU-bladeAngle blade |
| Blade width |
mm |
Straight tilt blade 3725×1395U blade3860×1379 Angle blade4365×1107 |
| Dozing capacity |
m 3 |
Straight tilt blade 7.8 U blade 8.4Angle blade 5.4 |
| Ma× drop below ground of blade |
mm |
540 |
| Lift height of blade |
mm |
1210 |
| Ripper type |
- |
Single ripperThree-shank ripper |
| Ripping depth of ripper |
mm |
Single ripper 695Three-shank ripper 666 |
| Lifting height of ripper |
mm |
Single ripper 515 Three-shank ripper 555 |
| Number of carriers (each side) |
- |
2 |
| Number of track rollers (each side) |
- |
7 |
| Number of track shoes (each side) |
- |
39 |
| Width of track shoe |
mm |
560/610/660 |
| Track gauge |
mm |
2000 |
| Ground length and ground pressure |
mm/MPa |
2840-0.078 |
| Pitch |
mm |
216 |
| Forward speed |
km/h |
0-3.8 |
| 0-6.8 |
| 0-11.8 |
| Reverse speed |
km/h |
0-4.9 |
| 0-8.5 |
| 0-14.3 |
Audited Supplier 
){kind=link}
){kind=link}