| Certification: | CE |
|---|---|
| Condition: | New |
| Maximum Lifting Height: | >40m |
| Maximum Lifting Weight: | >16t |
| Shaft Number: | 2 |
| Crane Jib: | Four-Arm |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Excellent performance
Key structural optimization, improve the product performance. Over-length boom and high tensile steel U-sharped boom, which allows for decreased boom weight and increased boom strength. Two-axle off-roader chassis, four-wheel driving, four-steering modes have good mobility.
Energy and High efficiency
The load sensitive variable displacement piston pump is applied to adjust the pump displacement in real time with little energy loss during operation. The dead-weight luffing compensation hydraulic system is applied to ensure good micro-mobility and excellent stability. The four-wheel steering control system is applied to ensure four individual steering modes with flexible operation. The dual-circuit braking system is applied with individual brakes for front and rear wheels and pressure maintained by an accumulator, providing good braking effect. Slewing and steering circuits are controlled by a priority valve, providing priority for steering control and ensuring the stability and rapid response of slewing action.
Safety and Reliable
Load moment limiter: The system can provide comprehensive protection for the lifting operation and will alarm if the crane is overloaded, guaranteeing operation safety. A three-wrap rope protector is applied to both main and auxiliary winches to prevent over rolling[1]out of wire rope. A height limiter is applied at both boom and jib ends to prevent over-hoisting of the wire rope. Equipped with length sensor, angle sensor and press sensor to indicate the working condition of whole crane in real-time, giving an alarm and cutting off the dangerous action automatically. Use high-quality axle, engine, gearbox, hydraulic pump and hydraulic motor etc. key parts, improve the reliable of product.
| Rough Terrain Crane | |||
| Units | SRC600C | SRC750 | |
| Overall Length | mm | 14300 | 14248 |
| Overall Width | mm | 3300 | 3340 |
| Overall Height | mm | 3760 | 3800 |
| Axle distance | mm | 4000 | 4264 |
| Wheel distance | mm | 2502 | 2562 |
| Max. traveling speed | km/h | 40 | 40 |
| Min. turning radius(2 wheels/4 wheels) | m | 12.3/6.7 | 12.5/7.5 |
| Min. ground clearance | mm | 500 | 350 |
| Approach angle | ° | 23 | 20 |
| Depature angle | ° | 20 | 19 |
| Braking distance(24km/h) | m | 75 | ≤9 |
| Max. gradeability | % | 150 | 75 |
| Fuel consumption per 100km | L | 150 | 65 |
| Max.single rope lifting speed of main winch(no load) | 120/130 | 125 | |
| Max. single rope lifting speed of auxiliary winch(no load) | s | 55/75 | 125 |
| Full extend/ retract time of boom | s | 2.6 | 120/130 |
| Full raise/lower time of boom | s | 35/30 | 70/100 |
| Max. slewing speed | r/min | 40/35 | 2 |
| Machine overall weight | kg | 44980 | 53440 |
| Front axle load | kg | 24800 | 27600 |
| Rear axle load | kg | 20180 | 25840 |
| Engine rated power | kw/rpm | 198/2500 | 210/2500 |
| Engine rated torque | N.m/rpm | 970/1500 | 970/1500 |
| Max. lifting capacity | kg | 55 | 75 |
| Min. lifting radius | m | 3 | 3 |
| Max. lifting moment- Base boom | kN.m | 2009 | 2529 |
| Max. lifting moment- Full extend boom | kN.m | 892 | 1232 |
| Outrigger span(Longitudinal/ Transversal) | m | 7.2*7.2 | 7.4*7.52 |
| Lifting height-base boom | m | 13.8 | 11.8 |
| Lifting height-Full extend boom | m | 44.3 | 44.5 |
| Lifting height-Full extend boom +jib | m | 60.6 | 62.5 |
| Length-base boom | m | 11.5 | 11.8 |
| Length-full extend boom | m | 43 | 45 |
| Length- full extend boom +jib | m | 59 | 61 |
| Jib offset | ° | 0 ° 15 ° 30 ° | 0 ° 20 ° 40 ° |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}